Products

The SpectrAlert Advance series
SpectrAlert® Advance selectable-output horns, strobes, and horn/strobes are rich with features guaranteed to cut installation times and maximize profits.

SSM/SSV Series Alarm Bells
System Sensor’s SSM and SSV series bells are low current, high decibel notification appliances for use in fire and burglary systems or other signaling applications.

NFS-640 Intelligent Addressable Fire Alarm System
The NFS-640 intelligent Fire Alarm Control Panel is part of the ONYX™ Series of Fire Alarm Controls from NOTIFIER. As a stand-alone small-to-large system, or as a large network, the ONYX™ Series of products meets virtually every application requirement.

NFS-320 Intelligent Addressable Fire Alarm System
The NFS-320 intelligent Fire Alarm Control Panel is part of the ONYX® Series of Fire Alarm Controls from NOTIFIER. As a stand-alone small-to-medium system, or as a large network, the ONYX Series of products meets virtually every application requirement.

NGB-12 Series Non-Coded Manual Fire Alarm Pull Stations
The NOTIFIER NGB-12 Series is a cost-effective,feature paceked series of non-code manual fiore alarm pull stations.It was designed to meed multiple applications with the installer and end-user in mind. THe NBG-12 Series features a variety of models including single and dual-action versions.

MODEL : LD-115
ไฟสำรองฉุกเฉิน DYNO รุ่น LD-115 เป็นหนึ่งในผลิตภัณฑ์ด้านความปลอดภัยที่ล้ำสมัยที่สุด อันเป็นผลมาจากที่มีการได้รวมหลอดไฟ LED ชนิด HIGH POWER / HIGHT LUMEN เข้ากับ MICROCONTROLLER และ Intelligent Battery Charger ซึ่งเป็นนวัตกรรมล่าสุดดังกล่าวยังได้คุณประโยชน์ต่อผู้ใช้งาน

Model BEAM1224(S)Single-ended Reflected Type Beam Smoke Detector Removable plug-in terminal blocks Digital display for easy alignment Built-in automatic gain control compensates for signal deterioration from dust build-up Remote test station optionalPaintable cover Easiest alignment in the industry.

5600 Series Mechanical Heat Detectors
System Sensor’s 5600 series mechanical heat detectors offer a low-costmeans for property protection against fire, and for non-life-safety installations where smoke detectors are inappropriate.

LED EXIT LIGHT BOX XBE Series
ป้ายไฟทางออกฉุกเฉิน DYNO รุ่น XBE Series เป็นหนึ่งในผลิตภัณฑ์ด้านความปลอดภัยที่ได้รวมเอาหลอดไฟ LED ชนิด High Power / High Lumen ซึ่งเป็นอุปกรณ์ทางเทคโนโลยีการส่องสว่างที่ทันสมัยที่สุด เข้ากับ Microcontroller และ Intelligen Battery Charger ทำให้ได้มาซึ่งนวัตกรรมที่ยังให้เกิดคุณประโยชน์ต่อผู้ใช้งาน

SLIMLINE LED EXIT SIGN LX Series
แสงสว่างสม่ำเสมอเท่ากันทุกจุดบนแผ่นป้าย กล่องอลูมิเนียมแข็งแรงทนทาน ไม่ขึ้นสนิม ดีไซน์บางกะทัดรัด ดูทันสมัย ป้องกันการประจุไฟเกินโดยการจำกัดแรงดันเพื่อยืดอายุการใช้งานของแบตเตอรี่ มีรูปแบบการติดตั้งหลายรูปแบบ

LED EMERGENCY LIGHTING LUMINAIRE
ไฟสำรองฉุกเฉิน DYNO รุ่น LD - 215 เป็นหนึ่งในผลิตภัณฑ์ด้านความปลอดภัยที่ล้ำสมัยที่สุด อันเป็นผลเนื่องจากที่มีการได้รวมหลอดไฟ LED ชนิด HIGH POWER / HIGH LUMEN เข้ากับ MICROCONTROLLER และ Intelligent Battery Charger ซึ่งนวัตกรรมล่าสุดดังกล่าวยังให้เกิดคุณประโยชน์ต่อผู้ใช้งาน

ELECTRONIC BALLASTS
บัลลาสท์อิเล็กทรอนิกส์ชนิดหรี่แสง( Dimmable Electronic Ballast) เป็นอุปกรณ์ที่ใช้ขับฟลูออเรสเซนต์ โดยเน้นการควบคุมกำลังการส่องสว่าง(หรี่/เร่ง)ด้วยสัญญาณควบคุม 0-10 VDC. เหมาะสำหรับงานตกแต่งและโครงการประหยัดพลังงานต่างๆ

FIRE ALARM PANEL FAP128N SERIES
The FAP128N series fire alarm panel is developed to provide a cost and space saving conventional fire alarm panel together with more user oriented fuctions.The height of the panel comes to approximately 80% of that of our last 40 zones fire alarm panel. The weight of the panel is reduced by approximately 70% of that of our last 40 zones fire alarm panel.

FIRE ALARM PANEL FAP129N SERIES
The FAP129N series fire alarm panel was developed to provide a cost-and space-saving conventional fire alarm panel together with more user-oriented fuctions.The size of the panel comes to approximately one-half the depth,one-half the area, one fourth the volume, and one-fifth the weigth of our last 20-zone fire alarm panel. The cabinet is made of of ABS resin with non-flammability to UL-94V2

PHOTOELECTRIC SMOKE DETECTOR FDK SERIES
The FDK series photoelectric smoke detector detect combustion product(smoke) generated by a fire, and transtion products(smoke) generated by a fire ,and transmit an alarm signal to the fire alarm control panel.The photoeletric smoke detector can detect a fire in an earlier stage than a heat detector. Generally, this detector is installed in the spaces such as basements, ordinaray floors, corridors, staircases, elevator shafts.

RATE OF RISE DETECTOR FDPJ SERIES
The FDP series rate-of-rise detectors operate on the pneumatic principle, i.e. the expansion of head air in the air chamber, and respond to rapid rise in temperature caused by fire. A slow or gradual temperature rise as would result from a heating system in the building does not activate the detector because of any moderate excess air is released into the atmosphere through the air vent. By the use of a common base, the FDP series rate-of-rise dectectors are interchangeable with NOHIM smoke detectors (FDS series and FDK series). This interchangeability enables optimun dectector types to be chosen for protected areas in cvase of change in the use of the rooms. The detector is equipped with a response indicator by which it is possible to readily identify the alarming detector. This feature facilitates the functional check of the detector.

MANUAL FIRE ALARM BOX FMM SERIES
The NOHMI's FMM series manual fire alarm box is used to manually initiate a fire alarm signal by pushing the plexi-glass which is connected to push-button switch. The operated plexi-glass is restored by only lifting up the reset lever inside the jack cover. A telephone jack is provided inside the jack cover on FMM120A and FMM160A. Putting the plug of a handset into the jack makes the tele-communication be ready between the fire alarm panel and the manual fire alarm box.

LED Roblitz®HighbaySE
A consistent design with existing Roblitz® Highbayfamily which has been well accepted and appreciated by the markets

--> Robust die-cast aluminum housing with free air flow holes for excellent thermal dissipation

--> Distance between head sink and gear box ensures the lifetime of LED driver

--> Well designed optical lens provide good illumination uniformity and low glare

LED Simplitz®PANEL HIGHBAY
High performance LED High bay product for replacement of traditional T5 High bay from 2x54W to 6x54W with extremely high energy saving and low running cost.

--> High lumen output to replacement of up to 6x54W T5 Highbay
--> High system efficacy of 135lm/W
--> “Linear Optics” offered by the extruded lens, optimized for warehouses and logistics.
--> Modular and scalable deign provide wide range choice
--> Senor and DALI on request

LED Simplitz®Batten
--> 100lm/W systemefficacy

--> Two versions available for direct replacement with better performance –Achieve (ACH) for twin-lamp replacement, and Easy (ESY) for single-lamp replacement

--> Available in 2ft and 4ft

--> Anti-corrosion with anodized surface treatment

--> Full CCT options from 2700K to 6500K

--> Long service life under harsh environments -50.000h (L70 @ Ta +25oC)

--> High CRI of 85 and good colorconsistance of SDCM<4

Ecofitz®LED Water-proof

--> The same price level as T8 Water-proof

--> 50% energy saving in one to one T8 Water-proof replacement

--> Warranty 2 years

--> No re-lamping cost

--> Long lifetime 30000 hours

Ecofitz®LED Water-proof

--> Input Voltage: 110 ~ 270VAC&12/24VDC

--> Power:30 ~ 150W

--> Beam angle: NB/MB

--> CCT:3000K/4000K/5700K

--> Protectionrating / insulation class: IP66

--> Control: On/off (1~10V Dim can be customized)

--> Operation temperature: -30°C to +50°C

--> Approbation: CQC/CB

--> Robust mechanical design for extreme outdoor environment and easy to maintain

--> More than 110lm/W high efficacy

--> Best use of light to the target area while not creating glare to driver and environment

--> 50,000 hours lifetime saving maintenance cost

--> No hazardous materials

Ecofitz®LED Water-proof

--> Input Voltage: 110 ~ 270VAC

--> Power:70 ~ 270W

--> Beam angle: NB/MB/WB

--> CCT:3000K/4000K/5700K

--> Protectionrating / insulation class: IP66

--> Control: On/off (1~10V Dim can be customized)

--> Operation temperature: -30°C to +50°C

--> Approbation: CQC/CB

--> Robust mechanical design for extreme outdoor environment and easy to maintain

--> More than 130lm/W high efficacy

--> Best use of light to the target area while not creating glare to driver and environment

--> 50,000 hours lifetime saving maintenance cost

--> No hazardous materials